What is cartridge pleating?
What is cartridge pleating?
Cartridge pleating is a technique for even pleats to draw a large amount of fabric (skirt panels) down to a small measurement (waistband). If you want a pleated look but with the cartridge method, place your dots further apart, like 3/8″ or ½” or even more.
How much fabric do you need for cartridge pleats?
For medium weight fabric the 1/4″ really does work just fine. You can vary from 3/16” to 3/8” and even 1/2” for deeper pleats (fewer). For heavy fabric like heavy wool or twill you’ll want deeper pleats as the fabric doesn’t “smash” as much when you pull up a lot of pleats.
What fabric is best for pleating?
Polyester fabrics provide an enduring pleat, whilst silk satins, organzas, georgettes and taffeta fabrics make gorgeous pleated pieces – do note some silk qualities can lose some of their pleating hold when dry-cleaned.
What are the different types of pleats?
Types of Pleats – 6 Main Types with Pictures
- Box Pleats.
- Inverted Pleats.
- Kick Pleats.
- Knife Pleats.
- Accordion Pleats.
- PinTucks.
How do you sew cartridge pleats to the waistband?
Start attaching pleats to the waistband or tape using an overhand whipstitch. Sew two stitches into every pleat for a secure hold. Finish by re-threading a needle onto the long tails left at the starting point and push them through to the wrong side. Tie the threads together.
How are cartridge pleats calculated?
The Formula
- Decide on your pleat depth.
- Multiply your pleat depth by 2.
- Multiply this number by the number of pleats per inch.
- Multiply this number by the measurement of whichever body part the garment is going to go around (waist, neck, etc.).
- Divide this number by 36.
How do I permanently pleat fabric at home?
Pleat up the fabric or trim in the Perfect Pleater, with pins or cards. Spray solution directly onto cottons or linens. Spray solution onto a press cloth and lay the cloth over the pleats. PRESS pleats with iron on the fabrics heat setting; do not ‘iron’ the pleats by moving the iron – press down and hold.
What fabric should I use for a pleated skirt?
Cotton and wool make good pleats, while lighter fabrics like silk and satin do not. Keep in mind that you will need a piece of fabric that is long enough to fit around your waist three times, so you may want to measure the fabric while you are in the store.
Are pleats out of style?
Pleated pants are back in a big way. We’ve been seeing more relaxed trousers take the lead over the last couple seasons, and now pleats are lending themselves to the look. They add volume while still allowing the trousers to hang naturally for a contemporary silhouette. Here’s what you need to know about pleated pants.
What is the difference between tucks and pleats?
Tuck or Pleat? Tucks are kind of like pleats. The only difference is that tucks are stitched at their base so that the folds remain secured. You might be most familiar with the tiny pin tucks, but there are actually various different kinds of tucks as you’ll soon see.
What do Cartridge pleats do for a skirt?
Cartridge pleats are eye-catching! Neat little pleats stacked in a row, stitched together and standing at attention. Those little pleats do a heck of job too with getting an enormous amount of skirt fabric into a tiny waistband!
How do you attach pleats to a waistband?
Start attaching pleats to the waistband or tape using an overhand whipstitch. Sew two stitches into every pleat for a secure hold. Finish by re-threading a needle onto the long tails left at the starting point and push them through to the wrong side.
What’s the best way to sew Cartridge pleats?
Sew two stitches into every pleat for a secure hold. Finish by re-threading a needle onto the long tails left at the starting point and push them through to the wrong side. Tie the threads together. After sewing, fold the waistband up, kicking the bottom fold of each pleat out.
When did the use of Cartridge pleats end?
As opposed to the other types of pleats, cartridge pleats are seen throughout historical fashion but practically disappear in the late 19 th Century. Because they are completed by hand, they didn’t work in the new, mass-produced, assembly line garments. Cartridge pleats are characteristic of historical sewing.