What is cetol HLS plus?
What is cetol HLS plus?
Cetol HLS Plus is a low build, solvent-borne, semi-transparent woodstain for use on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber, fencing, or components subject to high levels of wear and abrasion, such as garden furniture, handrails and exterior decking.
Is sikkens cetol HLS water based?
In this video, we cover Sikkens Cetol HLS plus. HLS plus is a low build, solvent-based highly translucent exterior woodstain which can be used as a base coat on doors and windows.
How long does sikkens cetol filter 7 take to dry?
Two coats of Cetol Filter 7 plus should be applied, allowing a minimum of 16 hours drying time between coats.
How long does sikkens cetol last?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed.
How do you use cetol HLS?
Application
- Apply 1 coat with a good quality, long haired, natural bristle brush in a full flowing coat, laying off in the direction of the grain, using the minimum number of brush strokes necessary.
- Leave to dry for 24 hours.
- Finish joinery with two coats of Sikkens Cetol Filter 7 Plus.
How long does cetol last?
Cetol is the toughest finish on the market…it will last three years at least. So you can have a good looking boat redoing the teak every three years or have a real good looking boat by oiling it every four to six months.
How long will Sikkens stain last?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side.
How long does sikkens cetol take to dry?
Sikkens Proluxe Cetol SRD Dry Time Drying Time – 24 hours minimum at 68°F and 65% relative humidity. At temperatures below 50º F (10º C) or conditions of high humidity the drying time will be extended. Proluxe Cetol SRD dries to touch in approximately 6 hours. Wait 24 – 48 hours for light foot traffic.
What is the difference between cetol 1 and cetol 23?
Cetol 1 is a premium, translucent exterior wood basecoat to be used with Cetol 23 Plus. Its superior oil alkyd formulation offers excellent penetration and adhesion to vertical wood surfaces. Cetol 23 Plus is a premium, translucent topcoat for Cetol 1.
How long does cetol take to dry?
Apply 3 coats of Cetol® Marine Natural Teak. Always allow 24 hours drying time in between coats. Sanding between coats is not recommended as this will result in a reduction of dry film thickness.
Does cetol go bad?
Sikkens states in their literature that you should expect to get 2-4 years life out of their system on a sunny side of a house, and 3-5 years on a shady side. At this point, maintenance should be performed. Maintenance is cleaning the surface gently with bleach, TSP, and water.
How long to dry Sikkens cetol HLS plus woodstain?
Allow a minimum of 18-24 hours drying time. Where appropriate (e.g. for joinery items such as windows and doors), the first coat should be carefully denibbed using a fine grade nylon abrasive pad or a fine grade (P240 or finer) wet or dry silicon carbide abrasive paper, in the direction of the grain. Do not break through the surface coating.
Can you use cetol HLS plus as a base stain?
Cetol HLS plus is applied as a base stain prior to the application of higher build finishes such as Cetol Filter 7 plus or Cetol THB plus on smooth planed exterior joinery. Cetol HLS plus should not be used alone as a finish for hardwood timbers other than decking
What can Sikkens cetol hlse be used for?
Sikkens Cetol HLSe is a transparent, satin woodcare product for interior and exterior use. Its woodstain like qualities ensure the timber grain remains highly visible. It is suitable for most types of timber and can be used as standalone 3 or 4 coat system. It should also be used as a primer/basecoat when using Cetol Filter 7 Plus or Cetol Deck.