What is Cisco smartports?
What is Cisco smartports?
Configure Smartport Properties on an Interface. A smartport macro is a user-defined set of Cisco IOS Command Line Interface (CLI) commands. It allows you to set up common configurations quickly, easily, and consistently. It enables features, settings and communication for network devices.
What is macro in Cisco switch?
Understanding Smartports Macros Smartports macros provide a convenient way to save and share common configurations. You can use Smartports macros to enable features and settings based on the location of a switch in the network and for mass configuration deployments across the network.
What is device classifier?
Device Classifier. Beginning with Cisco IOS Release 15.0(1) SE, the device classifier (DC) feature is enabled by default on the switch. The DC collects information from MAC-OUI and protocols such as CDP, LLDP, and DHCP to identify devices. You must enable CDP and LLDP on the switch.
What is administrative Auto SmartPort?
The Smartport feature is a convenient way to share configuration macros to other connected devices. A Smartport macro is a script of commands configured on an interface to apply a particular setting. Auto Smartport waits for a device to be attached to an interface before apply a macro.
Can I turn off PoE?
Tap the Enable PoE button to enable or disable PoE. By default, PoE is enabled for all PoE-capable ports. If the button displays green, PoE is enabled on all selected PoE-capable ports. If the button displays white, PoE is disabled on all selected PoE-capable ports.
What is difference between PoE and PoE+?
One difference between PoE and PoE+ is the actual Institute of Electrical and Electronics Engineers (IEEE) standards themselves. PoE is 802.3af, while PoE+ is 802.3at. Currently, the max amount of power provided over Cat5 cabling is 15.4 watts for PoE and 25.5 watts for PoE+.
Which is an example of auto smartports port macro?
For example, when you connect a Cisco IP phone to a port, Auto Smartports applies the IP phone macro. The IP phone macro enables quality of service (QoS), security features, and a dedicated voice VLAN to ensure proper treatment of delay-sensitive voice traffic. Auto Smartports uses event triggers to map devices to port macros.
How to configure auto smartports in Windows 10?
If you enable both the macro auto device and the macro auto execute global configuration commands, the parameters specified in the command last executed are applied to the switch. Only one command is active on the switch. To avoid system conflicts when macros are applied, remove all port configurations except for 802.1x authentication.
How to configure auto smartports in Cisco ACS?
– VLAN ID and switch ACL name or number from the Cisco access control server (ACS) – ASP trigger name in an attribute-value (AV) pair. After the AV pair is downloaded, the switch applies the macro on the port. The downloaded VLAN ID or ACL name could conflict with the settings in the user-defined or builtin macro applied by the switch.
What are the event triggers for auto smartports?
Auto Smartports uses event triggers to map macros to the source port of the event. The most common triggers are based on Cisco Discovery Protocol (CDP) messages received from another device. A CDP event trigger occurs when these devices are detected: • Cisco Wireless Access Points, including autonomous and lightweight access points