What is PlatSil silicone?
What is PlatSil silicone?
PlatSil Gel series is an advanced prosthetic grade silicone rubber. It is a two-part platinum silicone system with a mix ratio of 1:1. It also has a very fast set and de-mould time.
How long does PlatSil gel 10 take to cure?
From the Polytek website; PlatSil Gel 10 is a unique, 1A:1B mix platinum silicone rubber with a 5-6 minute working time and a 30 minute demould to a Shore A10 hardness. Use PlatSil Gel 10 as a mould rubber, to create prosthetic appliances as well as for lifecasting….
| Weight | N/A |
|---|---|
| Silicone De-Mould Times | 30-59 mins |
What is Deadener silicone?
PlatSil® Deadener LV is an additive for PlatSil® Gels that is used widely in special effects and prosthetic appliance applications. It is used to eliminate the snappy, synthetic feel of silicone and simulate the look and feel of skin or human tissue.
What is PlatSil Gel?
PlatSil Gel 10 is our most popular two-part Silicone Rubber which cures (RTV) to a milky white, Shore A10 rubber. This silicone is most often used to make prosthetic appliances in conjunction with Smiths Theatrical Deadener for lifecasting and mold making.
What is addition cure silicone?
Addition curing systems are two part silicones which require the mixture of a silicone polymer with a catalyst to initiate the cure. These offer several advantages over one part systems, especially in production environments. Their cure can be greatly accelerated by heat curing.
What is Deadener used for?
Smith’s Theatrical Prosthetic Deadener is an additive for PlatSil® Gels that is used widely in special effects and prosthetic appliance applications. It is used to eliminate the snappy, synthetic feel of silicone and simulate the look and feel of skin or human tissue.
What does Deadener mean?
transitive verb. 1 : to impair in vigor or sensation : blunt deadened his enthusiasm deadened the pain. 2a : to deprive of brilliance. b : to make vapid or spiritless oxygen deadens wine.
How long does it take for silicone mold to set?
Normal curing time for most silicones is between 18- and 24-hours, but cure times may be greatly reduced by using fast-acting catalysts. When making molds in a studio where such equipment is available, de-airing in a vacuum chamber is recommended to remove trapped air bubbles.
Which is better addition or condensation silicone?
Both addition and condensation silicones produced stone dies that were larger in diameter and shorter in height than the tooth preparation. The most significant difference between types of silicone was that condensation silicones produced significantly shorter dies (-0.24% to -0.37%) than addition silicones (-0.08%).
Does silicone shrink when cured?
When the product cools or cures in the mold, it will begin shrinking. Shrinking will continue to happen to the part for the next 24 hours. If you are ever doing measurements on critical dimensions of a part, it should wait until 24 hours after molding.
https://www.youtube.com/channel/UCCVlC_lrdumBnn3S2pOHEhA