Other

What is the default password for comtrend router?

What is the default password for comtrend router?

Use Default Login Info to Access Your Comtrend Router Usernames: admin, root. Passwords: admin, root, 1234, 12345. If none of these work, you will have to reset your router to its factory configuration.

What is comtrend AR-5381u?

The AR-5381u is an IPv6 compliant, high performance 802.11n, 4-port Ethernet ADSL2+ Router with full routing capabilities to segment and route IP protocol. Connect with ADSL2+ OR Ethernet in FTTx The AR-5381u is an 802.11n (300Mbps) Wireless ADSL2+ router.

How do I setup my comtrend AR-5381u wireless router?

Configuring the Comtrend AR-5381U Router

1. From a web browser, go to “http://192.168.1.1”.
2. Click the “Advanced Setup” link on the left.
3. Click on the “WAN Service” link on the left.
4. Click on the “Edit” button on the row beginning with “ppp0”.

How do you reset a comtrend AR 5319?

Reset the modem back to factory defaults by holding the small button on the back of the modem for about 10 seconds while the modem is powered up. You are successfully able to log into the modem. 1) From a web browser, go to “http://192.168.1.1”. Login with the username “admin” and the password “admin”.

How do I put a password on my ComTrend router?

Comtrend 5374

1. Once you are into the router you will see a screen similar to the one you see below.
2. From here you will see an option for a “WPA/WPAI passphrase”.
3. top.
4. Once logged in you should see the router GUI.
5. On the next page we will see the 2.4Ghz & 5Ghz options on the left.
6. Click Apply to save changes.
7. Click Apply.

Why is the DSL light blinking on my router?

When your DSL (Digital Subscriber Line) is flashing it means that the modem is currently trying to sync to the Trustpower network. If the DSL light takes longer than a minute to connect and stop flashing, this means there could be a fault.

How do I change the password on my comtrend router?

How do I change the password to my router?

To change your router’s password:

1. Enter your router’s IP address into your favorite web browser.
2. Log in with the default username and password (both admin, usually).
3. Go to settings.
4. Select Change Router Password or a similar option.
5. Enter the new password.
6. Save the new settings.

Why my DSL is not working?

To resolve flashing DSL or no light on DSL LED issue: Try bypassing any splitters or other devices as they can sometimes cause interference with your DSL signal. We suggest you remove and re-plug the phone cable into the DSL modem and the wall jack to ensure the cable is plugged in securely.