What is the purpose of ATA spec 100?
What is the purpose of ATA spec 100?
ATA Spec 100 contains format and content guidelines for technical manuals written by aviation manufacturers and suppliers and is used by airlines and other segments of the industry in the maintenance of their respective products.
What is a ATA code?
ATA chapters (sometimes called “ATA 100 System Codes”) are a way of categorizing the various systems that are on a plane, originally created by the Air Transport Association in 1956. Look at any Component Maintenance Manual (CMM) for any civilian aircraft. ATA chapters are configured like this: 12-34-56.
What are the ATA chapters for avionics?
ATA Chapters
- 05-00-00 Periodic Inspections.
- 05-10-00 Time Limit.
- 05-20-00 Scheduled Maintenance Checks.
- 05-30-00 [As Required]
- 05-40-00 [As Required]
- 05-50-00 Unscheduled Maintenance Checks.
What is ATA 52?
Passenger/Crew. Emergency Exit. Cargo. Service.
How many ATA codes are there?
The ATA 100 chapters refers to the numbering system and referencing standards for commercial aircraft documentation. Through the 100 chapters, different systems and procedures of aircraft are detailed, allowing personnel to understand certain areas of commercial aircraft quickly and easily.
What are examples of the ATA chapters?
Aircraft Systems
| ATA Number | ATA Chapter name |
|---|---|
| ATA 20 | Standard Practices- Airframe |
| ATA 21 | Air Conditioning |
| ATA 22 | Auto Flight |
| ATA 23 | Communication |
What is ATA chapter and what are the ATA 100 System codes?
ATA Chapters, also known as the ATA 100 System Codes, refers to the categorization of parts as organized by the Air Transport Association. These numbers will typically be found in any Component Maintenance Manual (CMM) for any civilian aircraft and one category can consist of several subcategories for different parts.
What are the ATA chapter numbers?
Aircraft Systems
| ATA Number | ATA Chapter name |
|---|---|
| ATA 21 | Air Conditioning |
| ATA 22 | Auto Flight |
| ATA 23 | Communication |
| ATA 24 | Electrical Power |
What kind of metal is an expanded metal mesh made of?
Expanded Metal is produced from solid sheets or plates of carbon, galvanized and stainless steel, as well as aluminum and a variety of alloys of copper, nickel, silver, titanium and other metals. Because expanded metal is made from a solid sheet of metal, and it is not woven or welded – it can never unravel.
What kind of meshes can Metalex make?
Metalex’s variety of sizes, patterns and manufacturing capabilities ensure expanded metal solutions for virtually any application. We offer light and small meshes, intermediate meshes, large, heavy and grating meshes, micro meshes, and others. In addition, products are available in coils, sheets or custom blanks.
How is the SWD of expanded metal mesh measured?
The distance between the centers of bond strands in the mesh when measured along the short diamond diagonal. To illustrate this, in a diamond pattern shape like “<>,” the SWD would be measured from top to bottom. In the diagram above, the SWD would be approximately 0.372″ (0.265″ SWO plus 0.107″ of strand thickness). Long Way of Design (LWD).
How big is an expanded metal mesh fence?
Expanded metal mesh shall be subject to standard manufacturing tolerances. Standard Mesh:+/- 3/16” per foot of width on the SWD, +/- ½”-0” on LWD. Flattened Mesh +/- 3/16” per foot of width on the SWD, +/- ¾” on LWD. In addition to the SWD or short way diamond, there is also a measurement known as the LWD (long way of diamond).