What kind of hydraulic fluid does a Takeuchi take?
What kind of hydraulic fluid does a Takeuchi take?
Oils Suitable For Takeuchi Excavator: Hydraulic 46 Oil – 15w/40 Engine Oil, 10w/30 Engine Oil – 80w/90 Gearbox Oil.
How much oil does a Takeuchi tl12 take?
Operating Specifications
| Alternator Supplied Amperage | 80 A |
|---|---|
| Engine Oil Capacity | 3.5 gal (13 l) |
| Fuel Capacity | 23.8 gal (90 l) |
| Max Speed – high range | 7.2 mph (12 kph) |
| Max Speed – low range | 4.6 mph (7 kph) |
What does a Takeuchi TL130 weight?
Here is what we know about the Takeuchi TL130 Skid Steer Loader. It has a 4 cylinder engine that produces 67 horsepower. This Takeuchi TL130 skid steer operating weight is 7,646 pounds and is shown to the left with a standard bucket attachment.
How much does a Takeuchi tl140 weight?
9769 lbs
Operating Specifications
| Alternator Supplied Amperage | 50 A |
|---|---|
| Hydraulic System Fluid Capacity | 13.7 gal (52 l) |
| Max Speed | 4.6 mph (7 kph) |
| Operating Voltage | 12 V V |
| Operating Weight | 9769 lbs (4,431 kg) |
How wide is a t770?
Loader
| Bucket Width | 80 in (203 cm) |
|---|---|
| Operating Load | 3475 lbs (1,576 kg) |
| Operating Width | 80 in (203 cm) |
| Tipping Angle | 9929 ° |
How many horsepower is a Takeuchi tl140?
Engine
| Displacement | 187.7 cu in (0 m) |
|---|---|
| Gross Power | 81 hp (60 kw) |
| Number of Cylinders | 4 |
| Peak Torque | 193 lbs/ft |
| Power Measured @ | 2500 rpm |
What kind of hydraulic fluid does a Takeuchi use?
My entire fleet, including my Takeuchis, run on TO-4 spec 10W. I’ve got Takeuchis with nearly 10k hours, and the only failure even remotely related to the hydraulic oil has been the load check valve on the arm circuit of my 8k hr TB53FR, and, even that can’t be blamed on the oil.
What kind of oil should I put in my Takeuchi skidsteer?
Nope, your manual calls for an multigrade engine oil, not a “30 or 40”. As discussed previously this is a throwback to the “one size fits all” oils of yesteryear. The world has moved on since then. A multiviscosity fluid you’d be wasting your money IMHO. TBH if it was a Cat skidsteer the recommended oil would be a 10W hydraulic (or 10W TO-4).
How much oil to put in a hydraulic system?
Hydraulic systems generally work better on a purpose-designed hydraulic oil. With the experience posted above I’d take HMC’s advice if I were you and put 10W TO-4 in it.
Why is the load check valve on my Takeuchi not working?
I’ve got Takeuchis with nearly 10k hours, and the only failure even remotely related to the hydraulic oil has been the load check valve on the arm circuit of my 8k hr TB53FR, and, even that can’t be blamed on the oil. Damned plunger turned sideways in the bore, requiring replacement of that valve section.