What size trolling motor do I need for a 22 ft pontoon boat?
What size trolling motor do I need for a 22 ft pontoon boat?
So a typical 22′ pontoon boat loaded with gas and gear and a couple people will be around 3,000 pounds, which after the formula would mean you need a 60-pound thrust trolling motor.
How much horsepower is a 50 lb thrust trolling motor?
So every 746 watts is roughly equivalent to 1 horsepower. Using this formula the popular Newport Vessels NV-Series 55lb Thrust Trolling Motor is rated as 624 watts at the highest forward speed and so 624/746 = 0.84 and would be roughly equivalent to a 0.84 horsepower motor.
What size of Minn Kota do I need?
RECOMMENDATION: You need at least 2 pounds of thrust for every 100 pounds of fully loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
What size trolling motor do I need for a 16 foot aluminum boat?
If your boat is 16-foot or smaller, a high-thrust 12-volt model will be adequate for the conditions that you will face. If your boat is any longer, moving up to a 24- or 36-volt system is the only way to go for hassle-free boating.
What size trolling motor do I need for a 16 foot boat?
The rule of thumb is that larger motors require more battery capacity, and if you fish from dawn to dark with a boat of 16′ or longer, you’ll probably want 24V. Serious anglers who spend a lot of time on the water will appreciate a 36V motor.
Can you run trolling motor out of water?
Can You Run a Trolling Motor Out of Water? The short answer is, yes. The motor will run just as well out of water as if it were submerged. However, there’s no reason to run a trolling motor out of the water.
How do I choose the right size trolling motor?
General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
What sized trolling motor do I Need?
Generally speaking, the average shaft length for a trolling motor is around 60″, or 152cm, if you intend on mounting the motor on the bow of your boat. While this is a good rule of thumb, there are other things to consider when determining this length. If you really want to play it safe, you can choose a 48″ shaft for your trolling motor.
What size battery do you use for trolling motor?
The most popular options are 12V, 24V and 36V trolling motor batteries. A 12V motor draws 60A consuming approximately 720W. If your boat is longer than 16 feet, you might want to upgrade to a 24V motor.
How necessary is a trolling motor?
The Trolling Motor has become an important component for anglers who enjoy the stealthy movement from one area to the next while in search of their favorite fish. For others, the trolling motor may be the primary means by which the boat is propelled.
What size Marine Battery do I need for trolling motor?
Most trolling motor batteries fail due to lack of proper charging. We suggest selecting a 12 volt deep cycle marine battery with at least a 110 amp hour rating, usually a group 27 size battery.