Where are SunStar heaters manufactured?
Where are SunStar heaters manufactured?
All SunStar® products are manufactured for and sold by SunStar Heating Products, Inc. Our combined companies have over 75 employees and 75,000 square feet of manufacturing office and warehouse space in two locations: Charlotte, NC and Ipswich, England.
How efficient are radiant tube heaters?
Energy Efficient Infrared tube heaters can reduce energy bills up to 50% compared to alternative heating systems.
What is a tube heater?
Tube heaters are a cost effective and efficient option for hard to heat spaces such as manufacturing plants, warehouses, loading docks, car washes, greenhouses, garages, machine shops and farm buildings.
What size radiant heater do I need?
Accordingly, how big of a radiant heater do I need? As a rule of thumb, you’ll need roughly 10 watts of heating power for every square foot of floor area in the room. This means that a 1,500-watt heater can be the primary heat source for an area measuring up to 150 square feet.
How do tube heaters work?
As its name suggests, a tubular heater is a tube shaped heater; it provides heat through electricity heating the element inside the tube structure and the heat radiating out.
Are Tube Heaters any good?
Tubular heaters provide a great way of maintaining the ambient temperature in a variety of environments and are cleaner and more cost-effective than other alternatives. Here, in particular, tubular heaters provide a clean and efficient way of keeping the ambient temperature at just the right level.
How do I calculate my infrared heater?
How To Buy Infrared Heating Panels Guide
- Step 1: Measure the length, width and height of your room in metres.
- Step 2: Multiply the length by the width, and then multiply the result by the height. This will give you the volume of your room in metres cubed (m3).
- Step 3: Assess how well your home is insulated.
How do I calculate BTU for radiant heat?
Subtract the supply water temperature from the return water temperature to find the system temperature change. To find the system delivered Btu, multiply the Btu constant of 500 x the estimated Pump GPM x the System Temperature Change.
Do tube heaters need to be vented?
This tube heater must be vented in accordance with national, state, provincial, and local codes, and the guidelines in the Detroit Radiant Tube Heater General Manual (refer to pages 24 – 32) and applicable Series Insert Manual.
Who are the owners of SunStar heating products?
SunStar Heating Products, Inc. – We Make Winter Warmer Founded in 1987, SunStar Heating Products, Inc. is a wholly owned subsidiary of Gas-Fired Products, Inc. (a North Carolina Corporation founded in 1949 in Charlotte, NC).
What kind of cast iron is Sunstar burner made of?
SunStar utilizes burners that are made of heavy duty cast iron and are designed to enhance maximum primary and secondary air flow around the venturi assembly. The high velocity of the flame and the delayed flame-quench period minimize the products of combustion which include aldehyde, formic acid, nitrous oxide, and carbon monoxide.
How does a Sunstar floor heating system work?
The storage of the heat in the slab floor creates a low temperature emitter and a faster recovery time when large overhead doors are opened and closed.With a forced air system, the hot air rises to the ceiling and stratifies, gradually working its way down to thermostat level so that the floor slab never becomes warm enough to be comfortable.
What kind of connector does Sunstar eclipse heater use?
Whether you need to heat your garage, workshop, or other hard-to-heat spaces, the SunStar Eclipse infrared heater provides both the fuel efficiency of radiant heat and the installation flexibility you need…and all at a comfortable price. Includes 36″ stainless steel gas connector.