Which derailleur should be adjusted first?
Which derailleur should be adjusted first?
In a nutshell, adjust the front derailleur first, then the rear. If the derailers just need minor tweaking (they are basically in adjustment but are “not quite right”) then you adjust the one that is obviously wrong, check the overall adjustment again, then again adjust what needs adjusting.
How do I adjust an EPS file?
To adjust the derailleur, press and hold the MODE button on the EPS controls (D – Fig. 9) for approximately 6 seconds until the purple LED turns on. Adjust the position by pressing lever 2 (B – Fig.
Does the B screw affect shifting?
So what does happen when the B-Tension adjustment is too far away from the cog? Essentially, it just slows down your shifting. It will still work, but as the derailleur pushes on the chain from the inside, the shift takes place when the chain picks up the tooth on the next cog.
What are the 3 screws on a derailleur?
Limit screws- The limit screws control the area of motion a derailleur has. On most derailleurs there are three limit screws: the upper limit, Lower limit, and B-limit. The upper limit screw sets the maximum distance the derailleur can shift in high gears.
What are the dimensions of a Campagnolo rear derailleur dropout?
The distance of the rear derailleur hanger from the first sprocket influences this stroke, so it is indispensable to stay within the tole- rance prescribed as per the drawing (Fig. 1). ATTENTION! Campagnolo®rear derailleurs are designed to work with dropouts that have the dimensions shown in Fig. 2.
Can a rear derailleur be moved beyond the 10th sprocket?
Be very careful: as the rear derailleur does not move at a constant speed, when lever 2 is operated to move up to the 10th sprocket the rear derailleur may move beyond the 11th sprocket and touch the spokes. Left control lever Right control lever 1 – ZERO SETTING of the rear derailleur
What’s the correct way to adjust the rear derailleur?
KEEP THE FINGERS AWAY FROM THE FRONT DERAILLEUR WHEN OPERATING THE REAR DERAILLEUR TO PRE- VENT THE RISK OF CRUSHING. For correct adjustment: • take the rear derailleur to the 11th sprocket • tighten the screw until it touches the travel limit
How to adjust the chain on a Campagnolo?
If the chain is perfectly centred, from the 2nd to the 10th sprocket: • the chain moves closer to the lower sprocket by moving 3 times downwards • the chain moves closer to the upper sprocket by moving 3 times upwards To save the adjustment, briefly press the MODE button located on the EPS controls (Fig. 8).