April 2020 – Page 41 – Roadlesstraveledstore

Q&A

5 min
5 years
733 words
1
2

How long can a shelf be before it sags?

How long can a shelf be before it sags? The eye will notice a deflection of 1/32 inch per running foot so […]

How long can a shelf be before it sags?

The eye will notice a deflection of 1/32 inch per running foot so that a fully loaded (70-80 pounds) bookshelf that is 3 feet wide, should sag no more than 3/32 inches. For most shelves made from 3/4 inch stock, a practical span is 30 to 36 inches.

How wide can shelves be without sagging?

Bookshelf width is typically no more than 12 inches. If the space is limited, the shelf can be reduced to 9 inches. Single bookcase units with two sides, top and bottom should be no wider than 36 inches without a center support.

What is the length of a shelf?

Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves….Contact Us.

Storage Item	Spacing	Depth
Large Hardcover Books	15″	12″

How far should floating shelves be apart?

12 inches
The rule of thumb for spacing is 12 inches between each shelf but bump that up to 15 or 18 inches and you enhance that sense of exposure and accessibility.

How much should a shelf bracket overhang?

Keep overhangs at each shelf end to 8 inches or less. Lighter loads can be held by supports screwed into every other stud at 32-inch intervals. Limit shelf overhangs to no more than 12 inches.

How do you support a shelf in the middle?

Making supports is easy, you just need to cut strips and glue or screw them in place. The best strips will run perpendicular to the shelf itself. Make these a couple inches tall, and have them run the entire width of the shelf. Two of these, placed it in thirds can add significant strength to a long wooden shelf.

What are shelf supports called?

shelf bracket
A shelf support is a fastener used to hang a shelf on the wall. Types of shelf supports: L-shaped shelf supports are named shelf bracket and they are a subset of angle brackets.

How thick should a floating shelf be?

What Size Floating Shelf Bracket Do I Need?

Thickness of Floating Shelf	Height of Bracket Backplate
2 to 2 ½ inches	1 ½ inch backplate
2 5/8 to 3 ¼ inches	2 inch backplate
3 ½ to 4 ½ inches	3 inch backplate
For Thicker Shelves	Contact for Custom Backplates

What is the length width and height of a shelf?

The standard height for a two-shelf bookcase is 32 inches. The standard width is 31 inches. The depth will range from 12 to 13 inches. However, it’s not hard to find a two-shelf bookcase as tall as 36 inches.

How long is too long for a shelf?

Span Limits The span limit is defined as the maximum distance apart that you can place the shelving supports. Glass, particleboard, solid lumber, plywood, and other common shelving materials can have span limits that can range from 18 inches to almost 5 feet.

How high should a shelf be above a TV?

“As a simple rule of thumb, your TV looks best mounted six to eight inches above a media cabinet or other piece of furniture that functions in the space.” That said, there isn’t a definitive rule for styling the rest of the wall around your TV, whether mounted or not.

How big of a shelf do I need to sag?

A 30” wide adjustable shelf that is 10” deep, made of any of these three (plywood, poplar, pine) materials, will have an acceptable sag for a load of up to 35# per foot, or about 90# for the entire shelf.

Why are some of my wood shelves sagging?

Not only is a sagging shelf unsightly, but it may also be a safety concern. There are several factors that affect the amount of shelf sag: the material used; the thickness, width, and length; and the expected load the shelf will carry. Determining appropriate values for some of these factors is not always an easy task.

How does the sagulator help you design shelves?

The Sagulator helps you design shelves by calculating shelf sag (deflection) given type of shelf material, shelf load, load distribution, dimensions, and method of attachment. You can also specify an edging strip to further stiffen the shelf. See the notes below for usage tips.

What’s the greatest length a shelf can be?

If you’re designing a cabinet or a bookcase, what’s the greatest length (span) a shelf can be without an objectionable sag? There are four factors to consider: 1) how the load is distributed, 2) the expected load, 3) the shelf material, 4) the method of reinforcement.

Guidelines

4 min
5 years
551 words
1

Is GTA 3 Available for PS2?

Is GTA 3 Available for PS2? An open world action-adventure video game, the Grand Theft Auto 3 is the third installment of […]

Is GTA 3 Available for PS2?

An open world action-adventure video game, the Grand Theft Auto 3 is the third installment of the Grand Theft Auto series. This video game was developed by DMA Design and published by Rockstar Games. Released on 21 October 2001 for the PlayStation 2 console, this game offers players a third-person perspective.

What is the code of GTA 3?

GTA 3 PC cheat codes list:

CHEAT	PC CHEAT CODE
All Weapons	GUNSGUNSGUNS
Money Cheat	IFIWEREARICHMAN
Full Armour	TORTOISE (or TURTOISE)
Full Health	GESUNDHEIT

Can you use cheats on GTA 3 PS4?

GTA 3 Cheats PS2, PS3 and PS4 Putting a new spin on Grand Theft Auto 3 with cheats codes for PlayStation (PS2, PS3 or PS4) is easy, quick and fun. If you were wondering how to activate cheats in the game, you’ve come to the right place.

Why is Claude muted GTA 3?

GTA 3’s infamous protagonist, Claude, kept his mouth shut throughout the entire game. Rockstar said this was mostly because it had other things to worry about during development, and “this did not seem like a major issue”. Rockstar introduced a talking lead character for Grand Theft Auto Vice City, its 2002 follow-up.

How do you fly in GTA 3?

Hold down the “Dodo Down” and “Forward” buttons. When sparks will fly from under the plane and you will hear a rattle (or just before this moment), release the “Dodo Down” and the plane will rise into the air.

How do you cheat on PS2?

The X, Circle, Triangle, and Square buttons are used for most cheat codes. The Circle button may sometimes be represented as the letter “O” in cheat guides. The Select button is occasionally used to enter cheats. The Start button must sometimes be pressed before you can input codes.

How do you activate cheats in GTA 3?

Type one of the codes below during gameplay to activate its function.

Invisible Cars: anicesetofwheels.
Destroy all cars: bangbangbang.
Speed up Gameplay: boooooring.
Flying vehicle: chittychittybb.
Better vehicle handling: cornerslikemad.
100% Health: gesundheit.
Tank (Rhino) appears: giveusatank.

How do you fly a car in GTA 3?

Flying Cars To fly any car that is fast enough (just about any car in the game), enter the Dodo cheat, Right, R2, Circle, R1, L2, Down, L1, R1 during gameplay. Use it to fly over the bridges, or shoot someone elses car.

What are the Cheat Codes for GTA V?

Can GTA 5 run on PS3?

It’s a marvel that the PlayStation, which was at the end of its console cycle, could run GTA 5 with no problems. It was a pleasant surprise for fans that the game wasn’t just releasing on the next-gen consoles, but on the PS3 and the Xbox 360 as well.

Is GTA 5 for PS3?

GTA 5 is also introduced on the ps3 console by rockstar games , unfortunately, they didn’t introduce mods for ps3. Much other mod developer tried and find a solution but many of them are paid.

Is GTA 5 for free?

Yes, you can now easily get the GTA 5 download PC for free from this website and play this free game on your computer or laptop. The full and free version is available here, so you don’t have to try out all the sites online that only claim that they possess a free file but never let you download it.

Other

1 min
5 years
144 words
1

How do you fix a collapsed ear canal?

How do you fix a collapsed ear canal? Adding more air to your middle ear can help to normalize pressure and fix […]

Guidelines

5 min
5 years
707 words
1
4

What did the Free African Society do in 1793?

What did the Free African Society do in 1793? The mission of the group was to provide fellowship, a place of worship, […]

Guidelines

5 min
5 years
741 words
1
1

Does the military still use hovercrafts?

Does the military still use hovercrafts? By the early 1970s, the basic concept had been well developed, and the hovercraft had found […]

Does the military still use hovercrafts?

By the early 1970s, the basic concept had been well developed, and the hovercraft had found a number of niche roles where its combination of features were advantageous. Today, they are found primarily in military use for amphibious operations, search-and-rescue vehicles in shallow water, and sporting vehicles.

Do the Marines use hovercraft?

The U.S. Navy uses hovercraft to speed Marines and their equipment to shore quickly.

How fast can Lcacs go?

Manufacturer: Textron Marine and Land Systems/Avondale Gulfport Marine. Speed: 40+ knots (46+ mph; 74.08 kph) with full load. The Landing Craft Air Cushion, or LCAC, is used primarily by the U.S. Marine Corps to transport troops and equipment from amphibious ships to operations ashore.

Can a hovercraft go on land?

They are also sometimes called air-cushion vehicles or ACVs. Hovercrafts are known as amphibious vehicles. That means they can travel over both land and water. Hovercrafts are more like airplanes than either boats or cars.

Why did they stop using hovercrafts?

Why is this? Essentially, they just aren’t cost effective. For the amount of fuel they take and the maintenance costs, combined with a lack of common comforts to the mode of travel, it just isn’t a feasible method of transportation in a majority of instances.

Are hovercrafts street legal?

One catch: It’s not street legal. It’s ideal for someone who enjoys off-roading or boating, or who maybe wants to fly across frozen Lake Geneva from one mansion to another. “You can’t just take it out on a freeway, yet,” Mercier said. “That’s because of the lack of maneuverability on older models.

Does the US Navy still use hovercraft?

The Landing Craft Air Cushion (LCAC) is a class of air-cushion vehicle (hovercraft) used as landing craft by the United States Navy’s Assault Craft Units and the Japan Maritime Self-Defense Force (JMSDF)….Landing Craft Air Cushion.

LCAC
Length	87 feet 11 inches (26.4 meters)
Width	47 feet (14.3 meters)
Crew	5

What is the largest hovercraft?

Zubr
The largest naval hovercraft, and the largest hovercraft currently in operation anywhere, is the Russian Zubr (NATO codename Pomornik) ship, which is 57 m (187 ft) long, 22.3 m (73.1 ft) wide and has a full load displacement of 535 tonnes (1.17 million lb).

How big is a military hovercraft?

For sailors in the U.S. Navy, hovercraft are very ordinary vehicles used to transport people and stuff from their large ships to an onshore base. The most highly used hovercraft is the Landing Craft Air Cushion (LCAC). The LCAC is the tank of hovercraft, it’s 28 meters long and can carry 75 tons of equipment.

How expensive is a hovercraft?

Rescue hovercraft range from $28,000 to $79,000 and commercial hovercraft from $36,000 to $90,000. Trailers range from $3,000 to $12,600. (Prices in US Dollars.)

Why is hovercraft not so popular?

Essentially, they just aren’t cost effective. For the amount of fuel they take and the maintenance costs, combined with a lack of common comforts to the mode of travel, it just isn’t a feasible method of transportation in a majority of instances.

Can a hovercraft sink?

So, if I stop on the water, will it sink? No. We’ve thought of that and all BHC hovercraft float like a boat. If it is completely swamped (i.e. full of water) it will continue to float as it has plenty of flotation foam fitted.

What are some uses for the hovercraft?

Hovercraft are used for many different applications as well as for leisure fun. Commercial applications for hovercraft include border patrol, flood, mud and ice rescues, surveying, for detection of UXO, for mosquito control, to scare birds from airports, bridge construction and maintenance, shell fish farming,…

What is the commercial use of hovercraft?

Because they can access areas other vehicles cannot, hovercraft are also used by the military for humanitarian assistance, rescue missions and disaster relief efforts. Passenger and commercial use. A group in Niagara, Canada is hoping to use hovercraft to ferry tourists and workers from Toronto and Niagara each day. The hovercraft would be a cost-effective option for commuters who must drive or fly to Niagara.

What is Hoover craft?

A hover craft is a type of vehicle that is supported on a cushion of air. They can be driven on a wide variety of terrain, can travel on water, and are often called Air-Cushion Vehicles. The hover craft was invented in 1952 by Sir Christopher Cockerell , who used a simple experiment with a vacuum cleaner motor…

Contributing

6 min
5 years
786 words
1

Can toads live with salamanders?

Can toads live with salamanders? It is possible to mix salamanders and frogs…it’s just on average a bad idea. There are just […]

What is a good road trip out west?

What is a good road trip out west? 9 Best Road Trips Through The Western United States Pacific Coast Scenic Byway, Highway […]

How do you stop your teeth from hurting after power chains?

How do you stop your teeth from hurting after power chains? You can help to ease pain from your braces or power […]

Other

4 min
5 years
571 words
1
1

What is Ctrl O in Eclipse?

What is Ctrl O in Eclipse? Eclipse “Quick outline” Ctrl + O (Windows) is an equivalent Idea “File Structure” Ctrl + F12 […]

What is Ctrl O in Eclipse?

Eclipse “Quick outline” Ctrl + O (Windows) is an equivalent Idea “File Structure” Ctrl + F12 !

Where can I find shortcuts in Eclipse?

ctrl+H. Open search dialog.
shift+ctrl+U. Show occurrences in file quick menu.
ctrl+G. Search declaration in workspace.
alt+ctrl+G. Find text in workspace.
shift+ctrl+G. Search references in workspace.

What does Ctrl Shift O do in Eclipse?

In Eclipse, you press CTRL + SHIFT + O “Organize Imports” to import packages automatically. For IntelliJ IDEA, if you press CTRL + ALT + O “Optimize Imports”, it just removes some unused imports, never imports any package.

How do I change hotkeys in Eclipse?

the main preference page can be found under window > preferences > general > keys (or faster: press ctrl+3 , type keys and press enter ). from here you can see all commands and assign/change their associated keyboard shortcuts.

What does Ctrl F stand for?

What is Ctrl-F? Ctrl-F is the shortcut in your browser or operating system that allows you to find words or phrases quickly. You can use it browsing a website, in a Word or Google document, even in a PDF. You can also select Find under the Edit menu of your browser or app.

What does Ctrl B do in Eclipse?

Essential Eclipse shortcuts & my favorite Eclipse shortcut list for Java beginners

Shortcuts	Description
F11	Run/debug last
Ctrl F11	Run
Ctrl Shift B	Toggle breakpoint
Ctrl D	Display

What is shortcut for system out Println in eclipse?

Ctrl + space
To get System. out. println() line in eclipse without typing the whole line type sysout and press Ctrl + space.

How do I search an entire workspace in eclipse?

Ctrl + Alt + G can be used to find selected text across a workspace in eclipse. Press Ctrl + H to bring up the search that includes options to search via project, directory, etc. Ctrl + H .

How do I format in eclipse?

Open the required file. Go to Source | Format Document or press Ctrl+Shift+F.

What is Ctrl h in Eclipse?

Search – Eclipse Shortcuts CTRL SHIFT G – Search for current cursor positioned word reference in workspace. CTRL H – Java search in workspace.

What’s the shortcut for Ctrl + O in Eclipse?

Ctrl + Alt + s ` to open settings. Press keyboard combination you like and I used Ctrl + Shift + o since I came from Eclipse world. The Ctrl + o has been bound already, so I used Ctrl + Shift + o instead Now, you can use Ctrl + Shift + o to trigger the file structure.

How to use JNDI in lower version of Tomcat?

If you are using lower version of Tomcat then you need to do some modifications to the servlet code, to remove WebServlet annotation and configure in web.xml file. This is the way to get the JNDI resources defined to be used by the application.

Why is Ctrl + F12 not working in Eclipse?

Ctrl+F12 works, because it is for file structure popup, which is similar to showing code in Eclipse. For some Linux kinds, and particularly for XFCE (like Xubuntu, Mint XFCE) a lot of default XWin keyboard layout mappings are not working. This is because they overlap with assigned Window Manager -> Keyboard shortcuts.

What are the shortcuts to delete a line in Eclipse?

NOTE: Standard shortcuts are not covered, such as Ctrl + A (select all), Ctrl + Z (undo), etc. Ctrl + D: Deletes current line. Ctrl + Delete: Deletes next word after the cursor.

Guidelines

5 min
5 years
716 words
1
4

What is the symbol for Anubis?

What is the symbol for Anubis? jackal The symbol of Anubis — a black canine or a muscular man with the head […]

What is the symbol for Anubis?

jackal
The symbol of Anubis — a black canine or a muscular man with the head of a black jackal — the ancient Egyptian god of the dead was said to oversee every aspect of the process of dying. He facilitated mummification, protected the graves of the dead, and decided whether or not one’s soul should be granted eternal life.

What is the Egyptian name for Anubis?

Anpu
Anubis, also called Anpu, ancient Egyptian god of the dead, represented by a jackal or the figure of a man with the head of a jackal. In the Early Dynastic period and the Old Kingdom, he enjoyed a preeminent (though not exclusive) position as lord of the dead, but he was later overshadowed by Osiris.

Does Anubis have a temple?

The Temples dedicated to Anubis, the God of the Dead, Tombs and Embalming, were believed to be the dwelling place of this famous Egyptian God. The Naos was the stone tabernacle inside the shrine which housed the great Statue of Anubis, the God of the Dead, Tombs and Embalming.

What is Anubis staff called?

Was sceptres
It appears as a stylized animal head at the top of a long, straight staff with a forked end. Was sceptres were used as symbols of power or dominion, and were associated with ancient Egyptian deities such as Set or Anubis as well as with the pharaoh. Was sceptres also represent the Set animal.

Is Anubis male or female?

Anubis is associated with his brother Wepwawet, another Egyptian god portrayed with a dog’s head or in canine form, but with grey or white fur. Historians assume that the two figures were eventually combined. Anubis’ female counterpart is Anput….

Anubis
Greek equivalent	Hades or Hermes

Who is the brother of Anubis?

Wepwawet
Anubis is associated with his brother Wepwawet, another Egyptian god portrayed with a dog’s head or in canine form, but with grey or white fur.

Who was Anubis wife?

Anput

Anput
Name in hieroglyphs
Symbol	jackal, canopic jars, mummy gauze
Consort	Anubis
Offspring	Kebechet

Why is Anubis Black?

Anubis was depicted in black, a color that symbolized regeneration, life, the soil of the Nile River, and the discoloration of the corpse after embalming. Anubis is associated with his brother Wepwawet, another Egyptian god portrayed with a dog’s head or in canine form, but with grey or white fur.

Why is Anubis bad?

Anubis, easily recognizable as an anthropomorphized jackal or dog, was the Egyptian god of the afterlife and mummification. He helped judge souls after their death and guided lost souls into the afterlife. Therefore, Anubis was not evil but rather one of the most important gods who kept evil out of Egypt.

What is Anubis weakness?

Weakness: Anubis is apparently unable to harm someone who possesses an ankh, the Egyptian symbol of life. History: (Egyptian Myth) – Anubis is the son of Osiris and Nephthys. As he grew, Anubis followed his father who became pharaoh by conquering the world.

Who was the wife of Anubis?

Where is the temple of Anubis in Cairo?

“Nestled among the ancient ruins of the Giza Plateau on the outskirts of Cairo, the Temple of Anubis is one of many new excavations in the area.

What kind of Scimitar is Anubis named after?

Anubis appears as an approximate version of the mythological Anubis it is named after, with a human body and a jackal head. Anubis’ actual “user” is a thin scimitar with an elaborate, jeweled-encrusted cross-guard complete with a scabbard.

What was the name of the Egyptian god Anubis?

Anubis’ female counterpart is Anput. His daughter is the serpent goddess Kebechet . “Anubis” is a Greek rendering of this god’s Egyptian name. Before the Greeks arrived in Egypt, around the 7th century BC, the god was known as Anpu or Inpu. The root of the name in ancient Egyptian language means “a royal child.”

Why was Anubis called he who is in the place of embalming?

As jmy-wt “He who is in the place of embalming”, Anubis was associated with mummification. He was also called ḫnty zḥ-nṯr “He who presides over the god’s booth”, in which “booth” could refer either to the place where embalming was carried out or the pharaoh’s burial chamber.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.