How do I set the timer on my Vent Axia fan?
How do I set the timer on my Vent Axia fan?
The timer can be activated by removing the Jumper JP1, this will give the fan a fixed over run time of approx. 15 mins. BEFORE ADJUSTING THE CONTROLLER, SWITCH OFF THE MAINS SUPPLY. HUMIDISTAT SHOULD ONLY BE ADJUSTED BEFORE OR DURING INSTALLATION.
What is vent axia Lo Carbon?
The new Lo-Carbon Response™ from Vent-Axia is a discreet, near silent, continuous running, constant volume dMEV solution. Designed for both new build and the social housing sector, the SAP Appendix Q listed Response is ideal for both kitchen and bathroom applications.
How do I turn off my Axia vent?
To switch the unit off: at the unit’s local isolator, turn the power off.
How do I set the timer on my bathroom extractor fan?
PIR Timer adjustment (Diagram 3) The time delay can be increased by firstly switching off the power to the fan, remove the front cover and insert a small screwdriver into the slot. Turning clockwise increases the time and turning anti-clockwise reduces the time.
What is a DMEV fan?
A decentralised Mechanical Extract Ventilation (d-MEV) system is a low energy, continuous mechanical extract ventilation system designed to replace conventional bathroom fans and draw moisture laden air out of the wet rooms (bathrooms and utility) providing a quieter and more efficient system.
What is a trickle boost switch?
A single gang switch to boost from high to low speeds on heat recovery systems.
How do I lower my extractor fan timer?
This time delay can be increased by firstly switching off the power to the fan. Remove front cover and the timer cover as detailed. Insert a small screwdriver into the slot marked . Turn clockwise to reduce the time and anti-clockwise to increase the time.
How does Mev work?
Centralised Mechanical Extract Ventilation (MEV) is a system where a central unit is mounted in a loft or cupboard and ducted to extract polluted air from the wet rooms of the house. As there is no heat recovery, there is no requirement for any ducts to supply the replacement air.
Which is the best Vent Axia or Lo carbon?
The attractive and discreet styling of the Vent-Axia Lo-Carbon Centra will complement the décor of any new home while virtually silent operation ensures optimum ventilation is achieved without intrusive noise. dMEV version recognised in SAP PCDB. Lo-Carbon Centra has a specific fan power of only 0.18 W/l/s in through-the-wall kitchen applications.
What kind of motor does the Vent Axia va150 use?
The Vent Axia Team. Vent-Axia Lo-Carbon VA150 fans feature Lo-Carbon long life DC energy saving motors that last up to 5 times longer than conventional motors, whilst delivering up to 60% energy savings.
What’s the fan power of a lo carbon centra?
Lo-Carbon Centra has a specific fan power of only 0.18 W/l/s in through-the-wall kitchen applications. Click here for technical information, within our Online Product Selector.
How does a Vent-Axia 15 l / s boost rate work?
Selection of the two trickle flow rates (6l/s or 9l/s) is via a simple ‘jumper’ on the control board. Different methods are available for operating the 15 l/s boost speed from a simple switched live to integral humidistat. See individual models for further details.