What is the best sealer for ipe?
What is the best sealer for ipe?
Even so, a good penetrating oil with a high trans-oxide pigment content is our preferred ipe finish; we’ve had the best luck with Penofin’s Marine Oil. Armstrong Clark oil-based stains are also very good.
Can ipe be sealed?
Do I have to seal Ipe wood? No, but you really should. During the initial exposure of your Ipe decking or hardwood siding on site, weather, especially UV rays, take a toll on outdoor woods. Putting a coat of UV inhibitive sealer on exterior hardwoods is a great idea.
What is the best finish for ipe?
The Best Finish for an Ipe Deck Advantage Lumber recommends Ipe Oil and WiseCoat, which are comparable products, although WiseCoat produces a slightly darker color. Penofin Oil Finish is another solvent-based penetrating oil finish designed for dense hardwoods, such as ipe.
How do you keep ipe looking new?
Ipe decks should be regularly kept clean of dirt and debris. Sweep leaves off the deck, don’t let rusting items sit on the wood, and hose off mud or spills. You can use a hose to safely clean off your deck but be careful when using a power washer.
Can you clear coat ipe?
This robust hardwood oil stain penetrates down deep into the dense, resin-rich fibers of hardwoods to highlight the all-natural wood grain qualities. Ipe Oil® hardwood deck oil finish is a durable, semi-transparent, and stain resistant hardwood finish.
Can you clear coat IPE?
Does IPE need to be sanded?
Should I Sand My Ipe Deck? If you need to refresh your Ipe flooring, you can sand the deck down to refinish it. Due to the nature of the wood’s grain, it is recommended not to use anything finer than 80-grit. After sanding, vacuum up the remaining particles.
Is it OK to pressure wash IPE?
Can I Power Wash My Ipe Decking? It is not recommended to power wash your Ipe decking, and the pressure can damage your boards. If you do choose to power wash, it is recommended that you use a low-pressure, wide-spray setting, certainly no more than 1,200 psi.
Is IPE hard to maintain?
IPE wood is popular among homeowners everywhere mainly because it is easy to preserve. You do not even have to clean your IPE deck every day. Because it is naturally resistant to extreme weather conditions, it can take heavy rain and snow without the risk of mold, rot, and mildew.
Do you have to seal the end grain of IPE?
When installing the deck make sure that all the all your deck wood is sealed on all four sides, including the ends. Though Ipe wood is highly resistant to mold and fungus because of its dense make up, if the ends aren’t sealed, that can be the easiest place for it to enter.
What is IPE, really?
Ipe, also called Brazilian walnut or lapacho, is a dense and resilient wood that comes from the forests of Central and South America. Like other tropical woods, ipe bears some unique characteristics.
Is IPE termite resistant?
Termite Resistant. According to the Forest Products Journal, IPE testing by the American Wood Protection Association (AWPA) proved IPE resistance to termites. For the study, IPE, Merbau, giant bamboo and juniper sapwood were exposed to termites by burying the wood in termite-infested soil. The test evaluated resistance to fungus and termites.