What is Recticel insulation made of?
What is Recticel insulation made of?
1.1 Eurothane Liquid Roofing Insulation Board is a rigid thermoset polyurethane insulation board, manufactured using CFC-/HCFC-free materials, and incorporating aluminium foil/kraft paper laminate facings on both sides.
What is Phenolic insulation?
Phenolic insulation is manufactured by a process in which a plastic foam forms an insulating core between two flexible tissue faced layers. It has a high closed cell content and fine cell structure. Rigid phenolic insulation is produced by mixing high solids and phenolic resin with a surface acting agent.
What materials are the insulation boards made of?
Just like XPS boards, EPS insulation boards are made of polystyrene. It is one of the most common types of insulation sheets. We especially know this insulation material as a protective material for household appliances. Expanded polystyrene (EPS) is often used in styrofoam insulation materials.
How strong is PIR insulation?
PIR insulation boards require approximately half the thickness of traditional forms of insulation to meet the same level of thermal performance. They achieve low R-values, as low as just 0.021W/mK. It is seen as greatest potential for energy saving today.
Is Recticel better than Celotex?
All of the Above hold the same thermal conductivity on 100mm Insulation Board of 0.022W/mK. Contrary to popular belief all of these brands work towards the industry standard of 0.022W/km. So, no matter the PIR insulation brand either Celotex, Recticel, or Kingspan they all do the same job.
Is Recticel insulation fireproof?
8.1 The product has a reaction to fire classification* of Class F to BS EN 13501-1 : 2007 and is therefore not classified as non combustible or of limited combustibility. The product is therefore restricted to buildings up to 18 m in height.
What is phenolic insulation used for?
Phenolic foam is used in process/petrochemical applications for the insulation of pipework, tanks, vessels etc. Phenolic foam is also used in a number of highly specialised applications including fire doors, highly fire resistant panels and for insulation in surface ships, off-shore installations and submarines.
Is phenolic insulation waterproof?
The thermal conductivity of phenolic closed cell insulation material is generally between 0.018 W/m.K and 0.023 W/m.K. It has fire retardant properties and a low smoke level (even under pyrolysis). It is water resistant. It is lightweight and so is easy to transport and install.
What material has the best insulation?
Aerogel is more expensive, but definitely the best type of insulation. Fiberglass is cheap, but requires careful handling. Mineral wool is effective, but not fire resistant. Cellulose is fire resistant, eco-friendly, and effective, but hard to apply.
What are the 3 types of insulation?
The most common insulation materials are fiberglass, cellulose and foam. Home insulation types include any of the above materials in the form of loose-fill, batts, rolls, foam board, spray foam and radiant barriers.
What type of insulation is PIR?
Polyisocyanurate
What is PIR insulation? Polyisocyanurate (PIR) is a thermoset plastic produced as a foam. This is bonded to a facing to create an insulation board.
Can PIR insulation wet?
EcoTherm PIR insulation boards are rigid in nature and a closed cell material, meaning water absorption is minimised. Other common types, such as mineral fibre batts, are not generally recommended as they can remain wet several months after exposure to flood water which slows down the wall drying process.
What makes a ballytherm insulation board so good?
Ballytherm insulation boards have a low thermal conductivity, which means less of the product is needed to achieve the desired thermal resistance and the tight-cell, rigid construction is designed for longevity. The insulation boards are also produced with a zero ozone depletion blowing agent.
What is the GWP of ballytherm thermal insulation?
Ballytherm Insulation is produced with a zero ozone depletion blowing agent. The Insulation boards’ low thermal conductivity mean less material is required to achieve a given thermal resistance than for most other insulants. Ballytherm Insulation has a GWP (Global Warming Potential) of <5.
What kind of blowing agent does ballytherm use?
Ballytherm insulation is produced with a zero ozone depletion blowing agent. The insulation boards low thermal conductivity means less material is required Ballytherm insulation is produced with a zero ozone depletion blowing agent. The insulation boards low thermal conductivity means less material is required
What kind of insulation can be used behind plasterboard?
Ballytherm insulation may be used safely behind non-flammable materials such as plasterboard; it has achieved a Class 1 surface spread of flame rating when tested to BS 476-7:1997. The PIR core of Ballytherm Insulation boards has a low moisture absorption capacity, making Ballytherm Insulation suitable for use in damp environments.