How much does a pivot cost per acre?
How much does a pivot cost per acre?
Short pivots have a very high cost per acre and longer pivots cost much less. On a 1/4 mile long pivot that irrigates 126 acres the installed cost may average between $75,000.00 and $80,000.00, plus freight. This would place the cost per acre at between $595.00 and $635.00 per acre.
How much does a pivot irrigation system cost?
Standard 160 acre system and end gun with actual irrigated area of 132 acres installed at a cost of $48,000 with a power and water source and connecting equipment cost of $30,000.
How much does a farming irrigation system cost?
Small systems which are operated by manual labor and gravity flow can cost as little as $50 and irrigate a small garden. Larger systems requiring pumps and permanent piping can cost from $1800 to $2500 an acre. All irrigation systems will cost you time to operate and manage.
How long is a 7 tower pivot?
The length of the span can vary between 130 and 200 feet. The typical pipe on the pivot has an outside diameter of 65/8 inches with a wall thickness of 0.109 inches. The pipe and the towers are typically galvanized to prevent corrosion.
How much does a quarter section Pivot cost?
Center pivots can range in cost from $60,000 to $140,000, depending on age and options, although some used systems have been available for as low as $30,000. The advantage of center-pivots is that they can be operated and monitored remotely; however, of course, they cannot be repaired remotely.
How many acres are in a circle?
If the radius is given in feet, the area is in square feet. To convert from square feet to acres, divide by 43560. So the acreage of a circular area is: Acres = π * radius_in_feet² / 43560.
How many acres are in a circle of corn?
IMAGE: U.S. Bureau of Land Management, via Wikipedia. These overlooked corners make up a not insubstantial percentage of a farmer’s available land. On a typical 160 acre “quarter section” in the American mid- and southwest, tessellating pivot circles will leave up to 24 acres, or 15 percent of each field, thirsty.
How much water does a center pivot use?
Most center pivots are designed to be capable of applying 0.3 inches over 24 hours at 6 gpm/ac, meaning you could potentially apply just over 2 inches in a week. Two inches per week or 9 inches in a month is more than enough water to meet a crop’s water use requirements in the humid East.
How much does a 40 acre pivot well cost?
“A 40-acre system sells for about $11,500 not including cost of installation or the well. That’s about 35% less than the price of a new comparable conventional system and about the same as a good used center pivot system,” says Dobbs.
Which is the latest version of Pivot Animator?
Pivot Animator 4 is the latest new and improved version of the Pivot Animator software. There’s a help file available to explain the new features and how to use them. If you would like to download Pivot Animator 4 then click the button below Please don’t redistribute or host Pivot 4 yourself.
How long do center pivot irrigation wheels last?
They do not have cables, so farmers can place them deep enough to stay safe from the center pivot wheels. The battery can operate up to 20 years underground; no maintenance is needed. How to Estimate the Center Pivot Irrigation Cost Savings?
How are center pivot irrigation costs related to water consumption?
The center pivot operating costs are directly proportional to the utilization of the system: the number of runs and the amount of water pumped. Reducing water consumption is a challenging task, however.