How do you get a stuck CD out of a 6 disc drive?
How do you get a stuck CD out of a 6 disc drive?
Straighten up a paper clip and use the sharp pointed edge to push a tiny hole located next to the tray that mounts your discs. This is your emergency eject button. The 6-disc CD changer tray should open immediately when you push this emergency button.
How do I change a CD in a 6 CD changer?
Select the loading slot by pressing the CD insert select button (1 – 6), then insert the CD. To insert 6 CDs to the CD changer, press the LOAD button for more than 1.5 seconds. The slot numbers (1 – 6) will illuminate on the display when CDs are loaded into the changer.
How do I install a CD changer?
Press the eject button (2), the magazine will then partly eject from the CD changer. Pull the disc tray from the magazine (3). Ensuring the playing surface is not touched, load a selected disc into the tray with the label facing upwards (4). Push the tray back into the magazine until it clicks.
What is CD changer?
Compact disc changers are devices that overcome a couple of the major issues that are typically encountered when listening to CDs on car audio systems. Since CD changers allow you to seamlessly switch between multiple discs at the touch of a button, they deal with both of those problems.
Why won’t my car CD player take the CD?
If the CD player will not accept the disc or if the disc keeps being ejected, there may be a problem with the disc that you are trying to play or the unit may need to be reset. Verify the disc is inserted into the CD player properly. The disc may eject if inserted upside down.
How do you fix a stuck CD tray?
How to Open a Jammed CD/DVD Drive
- Step 1: The Paper Clip. Straighten out one leg of the paper clip.
- Step 2: The Small Hole. Find the small hole on your CD drive, it is usually near the button.
- Step 3: Stick the Clip Into the Hole. Stick the clip into the hole and gently push until the door opens.
- Step 4: Finish.
How do I put a CD in my car?
Make sure the CD is face up (printed side up), then insert it into the CD player. After the CD is partially inserted, the CD player will pull it in the rest of the way. If the CD player is not accepting a CD, do not force the CD in. This likely means that your CD player is jammed, or has a CD currently in it.
How do you use a CD player?
Q: How do you use the CD player?
- Press the CD button.
- If you already have a disc loaded, it will automatically play from the point that you stopped it.
- If you don’t have a disc in, load it now.
- Just slide the disc into the player (with the label facing up).
- Use the Play/Pause button to play tracks or to pause a track.
Why are CD changers in the trunk?
It goes in the trunk, where the burglars don’t see it, and you control it through your radio. It holds compact discs — 6, 10, or 12 — like a mini-jukebox.
What is CD changer in a car?
Can a CD changer be repaired in a Ford?
CD Changer does not operate properly, skips, display shows ERR or BAD CD, we no longer repair this Ford CD changer. Radio displays “NO MAG”, “EMPTY MAG”, ERR, NO DJ, or CD’s skips, we no longer repair this Ford CD changer.
What should I do if my CD changer is not working?
Before repair, try disconnecting one of the battery terminals for several minutes then reconnect. This may act as a “Reset” and bring the changer back to working condition. Otherwise, this is a repair issue, see our Shipping page before sending for repair. No display. CD changer jammed, will not play CD’s, will not eject CD’s?
Can a defective CD player be switched on?
Once it has been disassembled, a defective module must be placed in its original packaging. The converter must be switched off before modules are assembled or disassembled. Neither test voltage nor signals must be applied to the modules until the device has been switched on.
How to repair a CD player with oscilloscope?
One 2-channel oscilloscope for the alignment The CD-player doesn’t recognize the loaded CD The CD-player recognizes the CD, but doesn’t play it The CD-player doesn’t play all songs The CD jumps while it is played 2.1 Cleaning the lens First of all you have to remove the cover of the casing to clean the laser lens.