How do I connect Xtraview Explora and HD PVR?
How do I connect Xtraview Explora and HD PVR?
You should first ensure you have a coaxial cable for both decoders and a Smart LNB device. The Explora is very convenient in this connection since it offers a range of connecting options. To make the connection, you can connect through the uni-cable ports on both decoders.
How do I install extra view on my smart LNB?
Using a coaxial cable, connect all decoders and run them to the smart LNB. If the decoders in your extra view connection are new models, use the uni-cable port to connect to the smart LNB. Once connected, both decoders will begin receiving a signal, and you can proceed to the installation wizard.
How do I setup my HD PVR 2?
Connect the HD PVR 2 to your PC (the PC where you will be recording) using the supplied USB cable. Connect the power to the HD PVR 2. Install Hauppauge Capture from this Support page in the Capture tab. When you are finished with the installation, you will need to reboot your PC.
How do I connect multiple decoders to one dish?
What you need in how to connect two decoders to one satellite dish. You can either use a signal splitter on your satellite or install a twin LNB. It is just like the regular smart LNB but offers more ports to connect the RG6 cable. When using a signal splitter, you should connect it to the smart LNB on your satellite.
Why does my PVR not record?
If the Recordings are not available error message appears when you try to watch a recording, you may have reached the maximum amount of paused or recorded content allowed on the Whole Home PVR, or the connection between the receiver and PVR may have been momentarily lost.
How to set up Xtraview for HD PVR 2P?
After the as update the decoder probably returned to the default user band and frequency settings Go to the network settings on the Exploration and see which user bands are in use for tuners 1,2,3. If still at defaults it should be use band 0 ,1,2. Then go to the HDPVR2P network settings sarcr universal.
How do I connect my PVR to my TV?
Connect the cable from the terrestrial antenna to the RF IN connector of the PVR. Refer to 2 on the illustration above. NB. Connecting a terrestrial antenna to your decoder is optional. Connect the RF Cable from the RF OUT connector of the PVR to the TV Link, then connect the TV Link to the RF IN connector of your TV.
Can you use DStv with a PVR 2P?
DSTV: Smart LNB + 2x HD PVR 2P’s connection for ExtraView. I’m trying to connect an extra HD PVR 2P to my existing DSTV “network” for ExtraView, EXACTLY as in the diagram.
Can a 2p PVR HD be linked to a 2nd decoder?
Iβm having difficulties linking my secondary decoder a 2p PVR HD with the primary decoder a 2A. Currently I have them both directly wired to the dish via a dual LNB (LMX 501) and then the decoders linked to each other via RF out to RF In on the second decoder.