Is 9mm the same as 1/4 inch?
Is 9mm the same as 1/4 inch?
6mm = almost 1/4 inch. 7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch. 9mm = almost 3/8 inch.
How thick in inches is 9.5 mm?
3/8 inch
Metric Conversion Charts and Standard Equivalents
| US measurement | Metric Measurement | |
|---|---|---|
| 1/4 inch | = | 6.35 mm |
| 3/8 inch | = | 9.5 mm |
| 1/2 inch | = | 12.7 mm |
| 5/8 inch | = | 15.9 mm |
How many MM is a 1/4 inch?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.062” | 1/16” | 1.57 mm |
| 0.125” | 1/8” | 3.18 mm |
| 0.188” | 3/16” | 4.78 mm |
| 0.250” | 1/4” | 6.35 mm |
What is the inch equivalent of 10 mm?
3/8 Inch
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
How big is 20mm round?
0.787 inches
All 20 mm cartridges have an outside projectile (bullet) diameter and barrel bore diameter of 0.787 inches (20.0 mm). These projectiles are typically 75 to 127 mm (3–5 in) long, cartridge cases are typically 75 to 152 mm (3–6 in) long, and most are shells, with an explosive payload and detonating fuze.
What size is smaller than 1/2 inch?
The largest division, 1/2″, has the longest line. The lines at each rank get shorter, ie: 1/4 is shorter than 1/2; 1/8 is shorter than 1/4; and 1/16 is shorter than 1/8. Fractions have two parts, the numerator and the denominator.
How thick is a MM?
There are ten millimetres in a centimetre. One millimetre is equal to 1000 micrometres or 1000000 nanometres. Since an inch is officially defined as exactly 25.4 millimetres, a millimetre is equal to exactly 5⁄127 (≈ 0.03937) of an inch….
| millimetre | |
|---|---|
| kilometres | 1×10−6 km |
| inches | 0.039370 in |
| feet | 0.0032808 ft |
How do you convert inches to MM?
Since there are 25.4 millimeters in one inch, the length in millimeters is equal to inches times by 25.4. Thus, the formula to convert inches to millimeters is the length multiplied by 25.4.
Can a 20mm destroy a tank?
No, 20mm HE will not destroy a modern MBT, ever. It might disable it.
What are the sizes of sockets?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).