What does fan ng mean on Samsung surround sound?
What does fan ng mean on Samsung surround sound?
fan no good
What is the model number of your Samsung DVD player? fan-ng most probably means “fan no good”, First check that the fan’s air vent is not blocked or obstructed by dust. If it is clear check that the fan is working (assuming your player has a fan-you don’t state the model number).
Why does my Samsung home theater keep turning off?
Your home theater system has built in overheating protection. If it gets too hot, it will shut itself down to prevent itself from melting. If it is turning off without shutting itself down first, there could be an issue with the power supply from the wall outlet.
Why does my receiver shut off by itself?
If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (e.g. refrigerator, air conditioner, heater, or vacuum) the receiver may shut itself off when there is insufficient current.
Why does my sound system keep turning off?
In many cases, premature shutoff of your unit can be caused by a problem with the speaker wiring between the receiver and speakers. A single strand of wire in the wrong place (causing a short circuit condition) will cause the unit to shut off at anything but very low volume levels.
What causes an amplifier to shut off?
There are several different reasons that an amplifier will get hot and shut down. Four of the most common are: Blown/grounded speaker(s), poor power and/or ground connections, too low an impedance (load), or Gain/Punch Bass control settings too high.
How do I keep my receiver from overheating?
Keep receiver vents well-dusted and free of debris….Move your receiver so it’s not in any of these locations:
- Directly on top of or underneath the TV.
- On top or underneath other electronic devices.
- On a soft surface like a rug or blanket (this causes the heat to insulate)
- In an area where its vents are blocked.
How do you fix receiver shutting down when you increase volume?
The best way to troubleshoot the receiver would be to remove all the speaker wires from the back of the receiver. Then turn on the receiver and increase the volume to the max. If the receiver shuts down with no speaker wires connected you may have an internal issue.
Is it bad if your amp gets hot?
You will be fine. Amps could run up to 85*C which is hot as hell!
How do I know if my receiver is overheating?
Check if your receiver is overheating by placing your hand on the top and sides of the unit. If it feels uncomfortably or irregularly hot to the touch, then overheating is likely the cause. You can also check the front panel display of the receiver since some systems feature warning indicators.
How do I stop my cable box from overheating?
Keep your audio/video equipment clean and clear of dust. Dust really well around the top and bottom vents to keep air traveling freely. Also, use a can of air duster to clear fans and vents easily.
Why does my receiver shut off when I turn up the volume?
New receivers automatically shut down because they may be sensing a short somewhere. This short can be internal (within the unit) or external (one of the speakers or speaker wires). The best way to troubleshoot the receiver would be to remove all the speaker wires from the back of the receiver.