What is iSTAT creatinine?
What is iSTAT creatinine?
About CREA The i-STAT Creatinine test is used for the quantitative determination of creatinine (crea) in whole blood on the i-STAT handheld. Creatinine measurements are used in the diagnosis and treatment of renal diseases, in monitoring renal dialysis, and as a calculation basis for measuring other urine analytes.
What can iSTAT measure?
i-STAT is a handheld battery-operated, reusable analyser. Samples are processed automatically and results are provided in 2 minutes. The CG4+ cartridge measures lactate, pH, bicarbonate, base excess, oxygen saturation, the partial pressures of oxygen and carbon dioxide and total carbon dioxide.
What is the normal creatinine level?
The typical range for serum creatinine is: For adult men, 0.74 to 1.35 mg/dL (65.4 to 119.3 micromoles/L) For adult women, 0.59 to 1.04 mg/dL (52.2 to 91.9 micromoles/L)
Is iSTAT creatinine waived?
Intended for use with the i-STAT System for the in vitro quantification of creatinine in arterial, venous, or capillary whole blood. (Old item#: ABBT-06F10-01.) FDA-cleared and CLIA-waived.
What are symptoms of high creatinine?
What are the symptoms of high creatinine levels?
- Nausea.
- Chest Pain.
- Muscle Cramps.
- Vomiting.
- Fatigue.
- Changes in urination frequency and appearance.
- High blood pressure.
- Swelling or fluid retention.
What is a dangerously high creatinine level?
What are considered high creatinine levels? A person with only one kidney may have a normal level of about 1.8 or 1.9. Creatinine levels that reach 2.0 or more in babies and 5.0 or more in adults may indicate severe kidney impairment.
What tests can an iSTAT run?
Test-specific, single-use i-STAT cartridges are available for a range of clinical tests, including cardiac markers, lactate, coagulation, blood gases, chemistries and electrolytes, and hematology.
How long do the cartridges need to sit at room temperature before you can use them?
Preparation for Use An individual cartridge may be used after standing 5 minutes, in its pouch, at room temperature. An entire box should stand at room temperature for one hour before cartridges are used.
What is a bad creatinine level?
According to the British Medical Journal, the usual reference range for serum creatinine is 60–110 micromoles per liter (mcmol/l), or 0.7–1.2 milligrams per deciliter (mg/dl), for males and 45–90 mcmol/l (0.5–1.0 mg/dl) for females. If creatinine is above these levels, doctors may consider it high.
What is the creatinine level for kidney failure?
A creatinine level of greater than 1.2 for women and greater than 1.4 for men may be an early sign that the kidneys are not working properly. As kidney disease progresses, the level of creatinine in the blood rises. This test is a measure of how well the kidneys are removing wastes and excess fluid from the blood.
When should I be concerned about creatinine?
Can creatinine be too low?
Low creatinine clearance levels can mean you have chronic kidney disease or serious kidney damage. Kidney damage can be from conditions such as a life-threatening infection, shock, cancer, low blood flow to the kidneys, or urinary tract blockage.
What is the purpose of the i STAT creatinine test?
The i-STAT Creatinine test is used for the quantitative determination of creatinine (crea) in whole blood on the i-STAT handheld. Creatinine measurements are used in the diagnosis and treatment of renal diseases, in monitoring renal dialysis, and as a calculation basis for measuring other urine analytes
What are the units of measurement for creatinine?
Creat; Blood Creatinine; Serum Creatinine; Urine Creatinine, Crea. Units of measurement. mmol/l, µmol/l, mg/dl, mg/100ml, mg%, mg/l, µg/ml. Creatinine is a breakdown product of creatine phosphate in muscle, and is usually produced at a fairly constant rate by the body (depending on muscle mass).
Is it normal for serum creatinine to be low?
Serum creatinine varies with the subject’s age, body weight, and sex. It is sometimes low in subjects with relatively small muscle mass, cachectic patients, amputees, and in older persons. A serum creatinine level that would usually be considered normal does not rule out the presence of impaired renal function.
What kind of POCT is used for creatinine testing?
The PoCT used in this study is the Chem8+, which measures serum sodium, potassium, chloride, bicarbonate, anion gap, ionized calcium, glucose, urea nitrogen, hemoglobin, hematocrit, and creatinine.