How do I factory reset my DSC?
How do I factory reset my DSC?
How Do I Reset a DSC Impassa to Factory Defaults?
- Power down the system. Start by opening up the DSC Impassa System.
- Apply the jumper. Connect a jumper between inputs IO1 and IO2.
- Perform the default. Plug in the AC transformer to power the system back on.
- Confirm the default. Disconnect the jumper.
What is the master code for DSC alarm?
1234
The default master code is 1234. The master code is automatically assigned to user number 40. The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system.
How do you clear the memory on a DSC alarm?
To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.
How do I permanently disable my DSC alarm?
How Do I Disarm My DSC Alarm System?
- Disarm from the panel. To disarm from the panel, simply enter in a valid user code or the Master Code.
- Disarm with a key fob. To disarm using a key fob simply press and hold the disarm button on a programmed key fob while within range of the system.
- Disarm through Alarm.com.
How do I bypass DSC zone?
How to Bypass a Zone on a DSC Power Series Security Alarm Panel
- The System Must be disarmed prior to proceeding.
- Press the * Key.
- Press the 1 Key.
- Use the > key to scroll to the zone you wish to bypass.
- Press the * Key on the appropriate zone.
- A “B” should appear next to the zone when the system is bypassed.
Where can I use a pc1616 alarm system?
WARNING: This equipment, PC1616/1832/1864 Alarm System shall be installed and used within an environment that provides the pollution degree max 2 and over-voltages category II non-hazardous locations, indoor only.
How do I default the DSC 1616, 1832, or 1864 panel?
How do I default the DSC 1616, 1832, or 1864 panel if I don’t have the installer code? It is not uncommon to run into a case where someone has either accidentally changed their installer code, forgotten what they changed it to, or are trying to takeover a panel that was installed by an alarm company that changed the installer code.
Where is the socket on a pc1616?
For North America the equipment is a direct plug-in connection; the socket outlet shall be installed near the PC1616/1832/1864 and shall be easily accessible. The plug of the direct plug-in transformer serves as the disconnect device.
What should I know about my DSC security system?
About Your Security System Your DSC Security System has been designed to provide you with the greatest possible flexibility and convenience. Read this manual carefully and have your installer instruct you on your system’s opera- tion and on which features have been implemented in your system.